Best Table Saw Blade

[Cover] Best Table Saw Blade

Any woodworker worth his (or her) salt knows that a table saw’s worth is determined by how professional its blade is. Third-rate blades are likely to make inexact cuts that spoil projects, making it a waste of time as well as money.

It is quite sure that since you are here, you most likely know that. You might as well be familiar with the fact that online shopping for tools is not a walk in the park, which is due to how hard it is to decipher which parts of a unit’s description give away useful information and which are nothing but sugarcoating for the sake of marketing.

We have collected the following feedbacks of the best table saw blades you can get today for you to become a knowledgeable client. You ought to wade through everything that could be useful for you in our included buying guide.

The Best Table Saw Blades – Our Picks

Table could not be displayed.

#1 – The Forrest WW10407125 10-Inch Blade

No products found.

Forrest’s WW10407125 Blade is quite puzzling for potential customers. It is one of the most costly saw blades available, which makes one wonder whether it is worthy of its cost. It includes a little cleavage which helps you spare around 1/8” per cut relative to minor-league blades. Regardless of how slender it is, it is robust, and you will not obtain any imprecise cuts caused by its vibration or tilting while in use.

The previously mentioned blade is mostly handmade, which involves hand tensioning and the hand-brazing of the teeth to the plate. Contrary to other brands, the whole course is humanly monitored, which means that the faults are corrected before the blades make their way into stores.

This blade’s good design contributes to the reduction of backside tear out, which is a factor that people always seek in a table saw blade. Though it happens to burn harder pieces of lumber at times, so you may want to take safety measures while carving them.

This blade is also dramatically overpriced compared to the other ones that the market has to offer. On the other hand, though, it is asserted to be the best table saw blade, and we believe that it is entitled to such title, so it is up to you to decide whether it is worthy of the amount of money required.

What we like about it

The Forrest WW10407125 10-Inch Blade’s best features are its small kerf, which is a dream for the perfectionists among us as it guarantees more precision. You will also like the fact that it is surprisingly sturdy, which goes in contradiction with how thin it is, sparing the user incidents such as clumsy cuts due to vibration or tilting. All of these factors, along with the hand-tensioning, can grant you a backside tea rout-free experience.

#2 – Freud d1050x Diablo Table Saw Blade

No products found.

Freud’s D1050X Diablo is convenient for the handyman who is to do a lot of ripping as well as crosscutting, without having to switchblades to get decent cuts of both types.

The Freud D1050X Diablo has fifty teeth, which is quite a great deal and will help you get better cuts. Forty of them are tiny, making this blade pretty useful when it comes to crosscutting. The rest of the teeth, on the other hand, are large and handy for getting rid of shavings while ripping, easing the procedure. The ability to perform both the ripping and crosscutting using this blade allows you to replace two blades and get satisfying results anyway.

The blade itself is laser-cut, which provides remarkable precision while in use. It also comes with a stabilizer which prevents trembling during the operation, as well as a Perma-shield nonstick coating, protecting the blade from damage caused by high temperatures or rust.

On the downside, this blade is not the best at rips nor at crosscuts, which means that if you are to principally do one of these types of cut in a perfectly precise way, you won’t settle for this blade. For the majority of the customers, this blade is the most economically convenient, as it is way less costly than our best table saw blade.

What we like about it

Fifty teeth that provide you with superior cut quality, along with a Perma-shield coating preserving the blade from damage. Not to forget the fact that it is laser-cut and comes with a stabilizer that reduces the chances of trembling. It also is good for ripping as well as crosscutting due to the variety in its teeth.

#3 – Dewalt DW3106P5 Table Saw Blade

No products found.

The DEWALT DW3106P5 is a tempting proposition for a large number of customers. It includes a duality of blades worth one, making it a provocative offer in case the blades do the job right. Both are ten-inch blades; one has thirty-two teeth useful for ripping as well as other broad purpose functions, while the other has sixty teeth for precise crosscutting. These blades are known to have a computer-balanced slab that helps prevent wobbling and grant higher accuracy and a precise finish.

However, some of the blades are highly inconvenient, which is why you ought to contemplate before proceeding with our purchase. The problem is that they are eccentrically sharpened, which is why some blades function superbly while other blades require enhancing before exploitation. If you are familiar with sharpening blades, it might not be of immense importance for you, although getting satisfying results will require some work anyway.

Along with the sharpness issues, these are not the best table saw blades when it comes to precise work since the edges they leave are more shredded than those left by their rivals. However, if you do not seek perfection, you will be more than satisfied with these blades’ cost.

What we like about it

Not only does the table saw in question comes with two blades, one that is useful for ripping and similar broad activities and the other for precise crosscutting, but it also costs next to nothing which allows it to compete with the best table saw blades available on the market.

#4 – Freud 10″ x 24T-Thin-Kerf Rip Table Saw Blade

No products found.

The Freud-10-inch blade is the epitome of versatility on our list. This is a multipurpose blade that can cut through virtually any material like a knife through hot butter. Not only that, but it also grants clean and precise cuts no matter what you’re cutting, though it may prove to be a bit slow when you need to feed-in different materials.

Thanks to its well-though thickness, this blade is excellent when it comes to cutting plywood, but it’s also suitable for normal pieces of lumber. That said, the Freud blade doesn’t perform as good on laminates and chipboard.

Besides being compatible with 8, 9, 10 and 11-inch table saws, this blade can be mounted on a miter saw, which is a huge plus.

What we like about it

If you’re looking for a decent ripping blade that you can add to your woodworking arsenal, the x 24T is an excellent choice to consider. Not only is it precise and powerful, but it’s also fast and doesn’t produce much waste, making it yet another one of the best table saw blades that you can get today.

#5 – Irwin Tools 1807368 Blades for Table Saws

No products found.

The Irwin Tools 1807368 is accessible at a low cost, making it quite valuable, but that means that you’ll have to make a few sacrifices. Similarly to the Freud D1050X Diablo, this model is invented to do crosscuts as well as rips ideally since its design combines many tiny teeth with fewer large teeth as well as channels useful for getting rid of the residue of wood shavings. It also is laser cut, which provides high precision on both the flat verges as well as the blades.

On the stumbling block, the model in question decays extremely fast compared to other blades. Some of the shoppers have proclaimed that they have exhausted it since the very first day, which is way too inferior to the durability one seeks in the best table saw blade.

It also suffers from quality control complications that you can see in the vibrating of the blades while in action, which gives you low-quality results. Lastly, the model itself is not useful for rapid cuts, so even if you are not bothered by the fact that it may decay fast or by its vibration, you will still waste a lot of time utilizing this model in comparison to superior blades. No matter how tempting this blade’s price might be, it certainly is too far from being the best table saw blade for the customers.

What we like about it

There are two good things about this product. The first one is the fact that it is laser cut, granting it amplified precision on the flat edges as well as the blades. The second is that it is quite adequate for ripping and for crosscutting since it has small teeth, large teeth, and gouges.

Choosing the Best Table Saw Blade – Buying Guide

[BG] Best Table Saw Blade

Now that you’ve taken a look at our picks for the title of the best table saw blade, it’s time for you to make up your mind and pick the right model for your workbench by going over our buying guide.

So, with no further ado, here are the main factors to consider when looking for the best table saw blade:

The Blade Size and What You Intend to Cut with It

It is crucial for you to reflect on the size of the blade that comes with your table saw. You might think of it as a primary point, but way too many customers seem to forget to make sure they are ordering the right size and end up with a wrong-sized blade, which is something you should avoid. The manual that comes with your saw table saw can be of help while looking for the right size to purchase; otherwise, you can easily detach your saw blade from the table and take its measures from one extremity to another.

Table saws mostly use ten-inch and twelve-inch table saws, so you may want to verify if the number you’re buying is not similar to any of these two. Guaranteeing that you purchase exactly the right-sized for your table saw is imperative for both safety and flexibility reasons.

Types of Cuts

In case you are a beginner, you most probably will be using one blade for all types of cuts for which you will be using your table saw. Now we are not saying that you are on the wrong track, it’s just that diversity in blade arrangements is more likely to add more quality to your cuts. If what you seek is a perfectly mirrorlike outcome or an extremely linear one that is also fragment-free, you will need a variety of blades that can go with the positioning alongside the grain.

So to be able to identify the sort of blade you will be working with, you have to be familiar with the two main types of cuts in woodworking, which are ripping and crosscutting.

Choosing between these two kinds of cuts depends on the grain in the board. Ripping mainly means that the cut and the grain share the same direction. Crosscutting, on the other hand, means you are going in the opposite direction to that of the grain. The grain commonly runs the entire length of the board. So to sum it up; let’s say that if your cut traverses the width, you are accomplishing a crosscut. But if your cutting is perpendicular to the width, thus parallel to the length, you are rip cutting.

Rip-Cut Blades

Table saws (whether they be hybrid, contractor, or portable). are typically convenient for rip cutting, just as circular saws and their blades get the job done perfectly while crosscutting. Although it is possible for you to accomplish a cross-cutting task using a table saw, but only if you choose the right blade and the proper safety measures, which you can check on our power tool safety guide.

For rip cuts, you will need a blade that comes with a few large teeth, thus fifty teeth as a maximum. If you seek a neat rip cut, then the twenty-four-tooth blade is not your best friend as it is specialized in rough rip cut. Instead, you could use a forty or fifty-tooth blade for a neat finish, but you’ll have to bear in mind that they’ll be functioning slowly since their teeth are smaller which explains the fact that they are combination blades.

Rip blades are characterized with small teeth and large craws, making it easier to get rid of the sawdust and get the job done quickly. They also include anti-kickback shoulders that help stabilize the wood while you are cutting it.

Crosscut Blades

Crosscut blades come with a minimum of forty small teeth, going up to eighty. The cleanness of the cut is proportional to the number of teeth if the blade is well made. At times a costly forty-tooth blade will provide a better result than a low cost eighty tooth blade.

The small size of the cross-cut blades’ craws and teeth makes them function slowly. Using these blades for rip cutting takes too long and reinforces the risk of a blowout or clumsy cutting.

Combination Blades

The previously brought up combination blades create a win-win situation. They include forty tiny crosscut-style teeth and small craws, between which exist ten bigger rip-style teeth with big craws. These blades are good at both ripping and crosscutting, which makes them convenient for broad-purpose tasks. If you don’t need high precision in ripping or crosscutting, these blades will be of use for you.

Picking the Best Table Saw Blade – Frequently Asked Questions

What Is the Kerf Width of Table Saw and How to Determine It?

What Is the Difference Between a Thick Blade and a Thin Blade Saw?


We hope that our reviews and buying guide have been of help for you to choose the best table saw blade. You have no excuse now, so go on, pick the best table saw blade for you and start cutting!


Jeffrey Alfaro

Jeffrey is a craftsman and writer who specializes in testing tools and covering the tool industry for construction and woodworking professionals.

View all posts by Jeffrey Alfaro →

Leave a Reply

Your email address will not be published. Required fields are marked *